Product Description

The motor used for the rear axle of a disc brake is mainly composed of silicon steel plates, enameled wires, magnetic steel, disc cutters, axle bags, etc. It is suitable for small cargo and small 3-wheel sealed vehicles and consists of a brake disc connected to the wheel and brake calipers on the edge of the disc. When braking, push the brake pad to clamp the brake disc and produce a braking effect. Disc brakes, sometimes also known as disc brakes, are divided into two types: regular disc brakes and ventilated disc brakes. Ventilated disc brakes are made by drilling many circular ventilation holes on the disc surface, cutting ventilation slots on the disc end face, or prefabricating rectangular ventilation holes. Ventilated disc brakes utilize the effect of airflow, and their cooling and heating effects are better than ordinary disc brakes. The main advantage of disc brakes is that they can quickly brake at high speeds, have better heat dissipation than drum brakes, and have good stability in braking efficiency. Using metal blocks (discs) instead of drums, there are flat brake shoes on both sides of the brake disc. When the hydraulic pressure from the brake master cylinder is sent to the sub cylinder, the brake shoes are clamped towards the brake disc to achieve a tight braking effect. At present, the Nanpu disc brake rear axle has developed from low-power models to high-power models, basically forming a disc brake rear axle braking system in various aspects such as integrated, split, large and small vehicles.